Dolphin PoolBot PB10 - robotic pool cleaner (2020 model)

PoolBot PB10 - a light power pack for your small pool

Floor cleaning

The robotic pool cleaner PoolBot PB10 is suitable for small swimming pools up to 8 x 4 metres (or 32m2) and only cleans the pool floor area.

Active brush system

With the active and efficient brushing system, the pool cleaning robot reliably removes impurities, bacteria and algae from the pool floor.

Filter system

The filter system of the pool robot is easily accessible. The filter container can be conveniently removed, cleaned and reinstalled from above with just one movement.

Cleaning mode with double speed

While the robotic pool cleaner moves via two caterpillars, its brush-system moves twice as fast the pool robot cleaner itself. Through the continuous rotation it eliminates algae, bacteria and floating particles. A crystal clear water is therefore guaranteed. 

An effective filter system

The Dolphin PoolBot PB10 works with a very easy-to-use filter system: Coarse soiling and the finest particles are collected in a collection bag. It can be removed easily and cleaned with the water hose. Recommendation: The collection bag should be cleaned after each usage. Optionally, the robot Dolphin can be equipped with a filter basket and ultrafine filter plates.

Simple control - easy operation

Comfortable control 

The PoolBot PB 10 can be installed and operated in only a few easy steps: Connect the power supply unit to the mains without switching it on. Now place the pool cleaning robot in the water using the handle and wait until it has sunk to the floor of your pool. Switch on the power supply – the Dolphin PoolBot PB10 will start cleaning automatically and randomly. It also stops automatically after the end of the cleaning cycle. After the robot Dolphin has been switched off and disconnected from the power supply, you can easily lift the small and light assistant out of the pool. The withdrawal is facilitated by a fast and above all dirt-free water return. 

Appropriate storage

If you don’t need to operate the robotic pool cleaner in a long time, please make sure that it is completely dry and cleaned – and protect it from rain, frost, sun and heat. 

The most important details about the PoolBot PB 10 at a glance:

• Light and robust power pack with only 6,3 kg
• Suitable for (above-ground) pools with up to 32 m² (= 8 x 4 m)
• Effective and efficient cleaning of the pool’s floor with a sophisticated brush system
• Works thoroughly and reliably in a salt content of up to 0,5 %

Repair service in case of a breakdown

Please find a claim form in our Download-section which you can use in the matters of a breakdown of your pool robot cleaner.