Intelligent Navigation, especially in narrow passages
With its patented mowing technology AIA (Artificial Intelligence Algorithm) the Worx Landroid WG757E robot lawn mower is able to navigate intelligently especially in narrow areas. In comparison to other robot mowers this technology makes its navigation up to 30 % faster.
Robot lawn mower with special cutting technique
Three rotating blades
With three rotating blades, the Landroid M cuts the grass reliably. The blades are sharp on two sides which enables you to reuse them. You just need to dismount the blades, twist and mount them again. Therefore, the blade wear can be reduced.
Mulch function for a healthy lawn
The robotic lawn mower produces fine mulch which falls down on the ground. There the chopped blades of grass function as a natural fertilizer and moisturiser – your lawn will become green and dense.
Continuous height adjustment
Worx WG757E allows you to adjust the mowing height continuously without any further tools. You can vary the height between 20 and 60 mm as needed.
Mowing to edge mode
At the push of a button the WG757E is mowing close to the edges of your lawn along the boundary wire. Thus it ensures a beautiful mowing result even at the edges of the lawn area.
Worx Landroid WG757E: Simple operation
The Landroid M robot mower is quickly installed because it is delivered to you already programmed. Via app for iOS and Android or with the LCD operation display you can adjust your robot lawn mower to your individual needs.
Zone programming and scheduling
If your property is complex and consists of several lawn areas, you can define several mowing zones. This will maximise the mowing efficiency for the separate areas of your lawn. You can also define a desired mowing schedule individually.
Worx Landroid WG757E mows fully automatically
Worx WG757E follows your programmed weekly schedule fully automatically. When finished its work or when the battery is low it autonomously returns to the docking station to recharge.
Safe operation due to several sensors
Lift and tilt sensors make the robotic lawn mower a secure device. If it is hitting an obstacle it changes the direction. If the device is lifted, the blades stop immediately. PIN-Code and an alarm function protect the Worx Landroid WG757E against theft.
Intelligent rain sensor
In wet weather the Worx Landroid WG757E robot lawn mower stops its work and returns to the docking station. When the grass is dry again, approximately 180 minutes after it has stopped raining, it goes back to work again.
Registration for three years manufacturer warranty
For an extension of the manufacturer warranty to three years you have register your Worx Landroid online within 30 days. Otherwise you will have the normal manufacturer warranty of 2 years.
- Included in delivery
Included in delivery
Worx Landroid WG757E
• Charge dock with 15m extension wire
• Battery pack
• Hex key (1 pc.)
• Screws (9 pcs.)
• Nails for securing the charging station (4 pcs.)
• Boundary wire (150 m)
• Blades (9 pcs.)
• Measurement gauges (2 pcs.)
• Staples (180 pcs.)
- Technical details
Manufacturer: Worx Model description: Worx Landroid WG757E Recommended up to (approx.): 800 m² Dimensions (approx.): 66,0 x 53,0 x 33,0 cm Weight (approx.): 10,2 kg Programming/controlling the app: Yes Height of cut: 20 - 60 mm Cut width: 18 cm Incline: 20° (35 %) Mowing in the rain: optional (adjustable using rain sensor) Navigation: AIA - Artificial Intelligence Algorithm Charging time (approx.): approx. 90 min Rechargeable battery life (approx.): approx. 60 min Guarantee on the product: 2 years Guarantee on the rechargeable battery: 1 year Type of rechargeable battery: Lithium-ion battery (28 V / 2 Ah) Boundary: Boundary Wire Volume (approx.): approx. 63 dB Safety: Alarm system, PIN, obstacle detection, multi sensors Special features:
• Rain sensor
• Mobile control via app
• Anti-theft protection (remote lock)
• Tilt and lift sensors
• "Cut to edge" function when pressing home button
• Pre-programed for easy use
- Payment and delivery
Payment and delivery
In addition to the indicated prices we charge EUR 10 per order for the delivery and handling, within Europe.
Deliveries in Europe will be made by GLS or a haulage firm (from 31.5 kg) within following International Delivery Times after the order is placed.
International Delivery Times:
Belgium 2 working days Bulgaria 5 to 6 working days Croatia 2 to 3 working days Czech Republic 2 working days Denmark 2 working days Estonia 4 to 5 working days Finland 4 to 6 working days France 2 to 3 working days Hungary 2 working days Ireland 4 working days Italy 2 to 3 working days Latvia 4 to 5 working days Lithuania 4 to 5 working days Luxembourg 2 working days Netherlands 2 working days Poland 3 working days Portugal 4 to 6 working days Romania 2 working days Slovakia 2 working days Slovenia 2 working days Spain 4 to 6 working days Sweden 3 to 5 working days
myRobotcenter offers a number of payment methods.
Do you have any questions about the various payment methods? Our customer service team will be happy to advise you; Please use our contact form.
- Product Questions
Product QuestionsDo you have a new question about the product for which you can’t find the answer here? Please submit your question here; we will answer as soon as possible.
A few days after your order you will receive an email through which you can submit your personal review.